MF2 Chipbreaker: First choice for finishing with negative inserts. Suitable for chip control at depths of cut down to 0,25 mm, provided that the feed rate is in excess of 0,25 mm rev. Good capacity for medium rough machining."> MF2 Chipbreaker: First choice for finishing with negative inserts. Suitable for chip control at depths of cut down to 0,25 mm, provided that the feed rate is in excess of 0,25 mm rev. Good capacity for medium rough machining."> MF2 Chipbreaker: First choice for finishing with negative inserts. Suitable for chip control at depths of cut down to 0,25 mm, provided that the feed rate is in excess of 0,25 mm rev. Good capacity for medium rough machining."> TCMT16T308-MF2 CP500 Triangular Turning Insert Single Sided With Centre Hole 1841250 85mm (2-7/32"-2-3/4") – introvertidamente.com
Terrace hour · Free shipping over $75 · Espresso & terracotta edit
Login Register
TCMT16T308-MF2 CP500 Triangular Turning Insert Single Sided With Centre Hole 1841250 85mm (2-7/32
TCMT16T308-MF2 CP500 Triangular Turning Insert Single Sided With Centre Hole 1841250 85mm (2-7/32
TCMT16T308-MF2 CP500 Triangular Turning Insert Single Sided With Centre Hole 1841250 85mm (2-7/32
TCMT16T308-MF2 CP500 Triangular Turning Insert Single Sided With Centre Hole 1841250 85mm (2-7/32
USD28.27 USD72.27

Pay in 4 interest-free payments of $7.07 Learn more

TCMT16T308-MF2 CP500 Triangular Turning Insert Single Sided With Centre Hole 1841250 85mm (2-7/32"-2-3/4")

SKU 52503973808
4.7
Description

85mm (2-7/32"-2-3/4")

Ultra-low lifting range 75mm to 500mm

34mm and Ø3

Description : With on-off switch and standard size with central lock knob allowing 3D movement & nicely finished anodised aluminium arms

TCMT16T308-MF2 CP500 Triangular Turning Insert Single Sided With Centre Hole 1841250 85mm (2-7/32"-2-3/4")CP500 Grade: Tough micrograin grade intended for finishing to medium roughing of stainless steels but with wide applicability for example in steels and aluminium alloys. Especially suitable in intermittent cuts. (Ti,Al)N + TiN p>MF2 Chipbreaker: First choice for finishing with negative inserts. Suitable for chip control at depths of cut down to 0,25 mm, provided that the feed rate is in excess of 0,25 mm rev. Good capacity for medium rough machining.

Exchange/Return Notes
  • We offer a 30-day return/exchange service after receiving.
  • Final sale items are not eligible for returns or exchanges.
  • To process your return/exchange, please contact us at [email protected]
  • Please click here for more details>>> Return & Exchange Policy

You may also like

recommand products